Metrahit Outdoor

True RMS Industrial Multimeter Dust and Water-Proof to IP65 High Basic Accuracy of 0.05%

The Metrahit Outdoor offers the same great spec as the Metrahit Xtra but it’s now sealed from the elements!

What we like: I know that we said the Metrahit PRO is our favourite multimeter and then that the Metrahit X-tra adds a few more measurement features, well the Metrahit Outdoor goes a little further offering you a fully sealed unit! This special multimeter is for the engineer who has to work in tougher conditions than most. If your normal multimeter has trouble working in the same conditions as you or it just can't take the rough and tumble of your job then its time you upgraded to the Metrahit Outdoor.

Ask An Expert

Check Delivery

Metrahit Outdoor Features

Extremely rugged, dust and water-proof
18 measurement/test functions
Integral memory for data logging storage of up to 15,400 measured values
0.05% Basic accuracy for DC volts
0.5% Basic accuracy for AC volts
True RMS AC & AC+DC measurements at up to 20 kHz bandwidth
12,000 count resolution
0 to 1000V AC/DC 10µV resolution
0 to 16A AC/DC down to 0.01µA resolution
Low input resistance Vac 1MΩ - Testing power supply systems
Low pass filter Vac 1kHz - Testing frequency converters
Bar graph indicates position within range
Resistance measurement 10mΩ – 40MΩ
Capacitance measurement from 10pF to 1000µF
Continuity & diode test with acoustic signal
Temperature measurement via Type K TC’s
Temperature measurement via pt100/1000 temperature probes
Frequency measurement 0.01Hz to 100KHz
5V square-wave measurement from 100Hz to 1MHz
Duty cycle displayed as % positive signal
Min/Max and display value storage
High contrast light-blue illuminated display
Auto power off plus battery level indicator
Data logging facility
Protective rubber holster with integral stand and panel hook
Complies with EN61010 safety standard
CAT IV 600V /CAT III 1000V

Metrahit Outdoor Description

The Metrahit Outdoor True RMS AC/DC Multimeter with Data Logging Facility features 5 voltage measurement functions, this includes AC, DC and AC/DC as well as a ‘Low Pass Filter’ and ‘Low Resistance’ test function. The separate AC, DC and AC/DC functions are important if you need to separate the AC/DC component for example when testing for AC ripple voltages in UPS DC battery charging systems. During AC voltage and frequency measurements a 1 kHz low-pass filter can be selected in order to filter out high frequency pulses of greater than 1 kHz, for example when performing measurements at pulsed motor drives, i.e. undesired voltages of greater than 1 kHz can be suppressed. The ‘Low Input Resistance’ function utilizes a low 1MΩ input resistance this lower resistance reduces erroneous displays resulting from capacitive coupling during voltage measurement in power supply systems.

The Metrahit Outdoor True RMS AC/DC Multimeter with Data Logging Facility also offers its unique ‘Auto Current Range’ with current measurements automatically switching between 6 current measurements ranges giving you AC/DC current measurements from 0.01μA to a max reading of 16A, all possible without the need to change a range selector switch or move the test leads. The instrument can be used continuously up to 10A and then up to 12A for 5 minutes with a warning bleep and then up to 16A for 30 seconds with a continuous warning bleep. A single fuse protects the instrument and user, eliminating unnecessary blown fuses in the low current ranges! The Metrahit Outdoor Auto-ranging feature is active as soon as the instrument is switched on, the instrument automatically selects the measuring range which allows for the highest possible resolution of the applied quantity.

The Metrahit Outdoor True RMS AC/DC Multimeter with Data Logging Facility allows for the recording and storage of 15,400 measured values recorded against real time to its integral memory. With the aid of the optional USB X-TRA Interface Adapter and METRAwin 10 Software you can download this recorded data to a PC/Laptop for evaluation and documentation.

The Metrahit Outdoor True RMS AC/DC Multimeter with Data Logging Facility also comes complete with the Metrahit ‘Automatic Blocking System’ this safety system prevents incorrect connection of the test leads to the multimeter once the function has been selected or incorrect function selection when the leads are connected to the meter! This system prevents unnecessary blown fuses, significantly reduces the potential danger to the user, instrument and system under test.

The Metrahit Outdoor also offers high contrast easy to read LCD display with bar graph and light-blue LED illumination for low lit conditions, a robust protective rubber holster with integral stand and panel hook and the extra strong case offers a separate well sealed battery and fuse compartment.

Metrahit Outdoor Test Kit Includes