Sineax P530 Description
The Sineax P530 Active Power Transducer is used for the measurement of Active Power in single or three phase AC power systems. The measurement range offered covers all AC systems including, single phase and three phase 3 or 4 wire systems with balanced or unbalance loads. The transducers converts the Active Power measurement into a proportional 4…20mA DC output signal. The transducer is offered with a choice of two wide power supply options 24…60V AC/DC or 85…230V AC/DC. The isolation system meet the requirements of EN61010-1 and for extra safety the transducers case is made from flame retardant self-extinguishing, non-dripping, halogen free polycarbonate with a UL-94 V0 rating.
At time of order you will need to confirm the nominal input voltage including the VT ratio which should fall between one of the following ranges:
100...115V
|
|
200...230V
|
|
380...440V
|
|
600...690V
|
|
|
|
|
|
|
|
We will also need to know the following:
- Current Input Range including the CT ratio
|
- Active Power Measurement Range
|
|
The Sineax P530 Active Power Transducer will then convert the required power measurement into a proportional -20…0…+20mA or 4…20mA DC output signal.