GW Instek APS-7100E

• Two AC output ranges are available 0…155Vrms 0…8.4A & 0…310Vrms 0…4.2A.
• Max 1000VA power curves in both low & high voltage ranges.
• Frequency range AC 45…500Hz.
• Test Mode Function allows you to quickly set up simulated mains power supply fluctuations for voltage and frequency.
• 10 sets of pre-set simulated power transient outputs can be stored to internal memory.
• There are 6 Measurement function include Voltage (rms), Current (rms), Power, Current (peak), Frequency & Power Factor that can all be displayed simultaneously.
• The large 4.3 inch TFT display gives the user a similar view to an AC Power Meter showing all 6 measurement functions.
• You can set variable Voltage, Frequency and Current limits plus the unit offers OCP/OPP & OTP Protection.

The GW Instek APS-7100E AC Power Source offer two AC voltage ranges of 0…155Vrms & 0…310Vrms. The output frequency range is 45…500Hz. This economical designed AC Power Source offers a cost effective reliable solution for test & development applications in your Test Laboratory, Research & Development, Production or Training Facility.

There are 6 Measurement function include Voltage (rms), Current (rms), Power, Current (peak), Frequency & Power Factor. The large 4.3 inch TFT display gives the user a similar view to an AC Power Meter and all 6 measurement functions can be displayed simultaneously. The Test Mode Function allows you to quickly set up simulated mains power supply fluctuations in voltage and frequency. The test function is split into 6 sections, the initial step is initial and final settings for the test the sequence runs from Initial…Normal-1…transitional-1…abnormal…transitional-2…Normal-2…initial. Up to 10 sets of simulated sequence power variables can be stored.

• GW Instek APS-7100E AC Power Source
• Output Terminal Cover Set
• GTL-123 Test Lead 1.2m.
• User Manual.