GW Instek MDO-2102A

• 2 Channel models with 3 bandwidth ranges of DC to 100MHz, 200MHz or 300MHz.
• 2GSample/s maximum sampling rate.
• 120,000wfms/s Waveform Update Rate.
• 20M maximum Memory Depth for each channel.
• Maximum 1M FFT Provides Higher Frequency Domain Resolution Measurements.
• All units are equipped with Spectrum Analyser functions.
• MDO-2000AG unit’s offers a Dual channel 25MHz Arbitrary Waveform Generator.
• Bright 8” WVGA TFT 800 x 480 Colour LCD Display.
• 1Mpts FFT Frequency Domain Signal Display.
• I²C/UART/CAN/LIN Serial Bus Trigger and Decoding Functions.
• DATA Log Function is able to Track Signal Changes for to 1000 hours
• Compact stylish innovative design, packed with measurement features

GW Instek MDO-2000A Series of Mixed Domain Oscilloscopes offers 6 models with bandwidths of 100MHz, 200MHz & 300MHz with Spectrum Analyser. The AG options also offer 25MHz Arbitrary Waveform Generator. The MDO-2000A Series is GW Instek’s latest advanced range of Mixed Domain Oscilloscopes offering a stylish innovative design, packed with measurement features.

This new generation of Mixed Domain Oscilloscopes provides better sampling rate and memory depth for users to obtain more realistic signal integrity, and higher bandwidth selections to meet the measurement requirements of higher frequencies. In addition to advanced oscilloscope specifications, the MDO-2000A series is also a dual-domain test platform. For frequency domain analysis, the spectrum analyzer measurement mode is provided to allow users to have frequency domain analysis with higher resolution. The FFT operation on the oscilloscope is limited by the horizontal level setting (sampling rate), and most oscilloscopes only provide 1k FFT points, so users often cannot get the correct frequency domain display.

The frequency domain provided by MDO-2000A has an operation interface the same as the general spectrum analyzer. Its fast frequency domain update is like a real time spectrum analyzer. While operating the spectrum analyzer of MDO-2000A, users can input Center frequency, Span, Start frequency, and Stop frequency based upon test requirements so as to rapidly and intuitively observe required frequency range that allows users to experience the user interface of a real spectrum analyzer. While observing frequency domain display, engineers can observe waveform characteristics, which are not easily to be seen from time domain waveforms, for instance, the harmonic composition of a waveform and the frequency characteristics of a modulation signal.
 

• MDO-2102A unit.
• 2 x GTP-100B-4 Switchable Passive Probe 
• User Manual 
• Power Cord
• Calibration Certificate