DC Voltage Measurement Transducers for Low Voltage Systems with 1kV AC/DC Isolation.
The Knick VariTrans P 29000 P2/01 DC Voltage Measurement Transducers offer a range of selectable voltage inputs from 0…100V to 0…1000V DC. The isolation system meets the requirements of EN61010-1 with 1kV AC/DC and protection against electric shock with protective separation to EN 61140. Robust 17.5mm wide rail mount housing with fixed screw terminals as standard.
What we like:
The VariTrans P 29000 P2/01 Voltage Measurement Transducers have been specially designed for the measurement of DC signals up to 1000V. They reliably isolate high voltage potentials at the input circuit. The separation distances are designed to withstand permanent voltages up to 1kV AC/DC. Protection against electric shock is achieved through protective separation according to EN 61140 between input and output and power supply.
There are 32 selectable DC voltage input ranges to choose from all via DIP switch selection. Measurement inputs can be either Unipolar & Bipolar and cover the following 16 ranges 100V, 150V, 200V, 250V, 300V, 350V, 400V, 450V, 500V, 600V, 700V, 750V, 800V, 900, 950V & 1000V. You can then choose your output signal requirement from 6 options including 4…20mA, -20…0…+20mA, +20…0…-20mA, -10…0…+10V & +10…0…-10V.