Current Shunt Measurement Transducer for Low Voltage Systems with 1kV AC/DC Isolation
The Knick VariTrans P 29001 P2/01 DC Low Voltage Measurement Transducers offer a range of selectable low voltage inputs for use with precision DC current shunts or low DC voltage signals. The isolation system meets the requirements of EN61010-1 with 1kV AC/DC and protection against electric shock with protective separation to EN 61140. Robust 17.5mm wide rail mount housing with fixed screw terminals as standard.
What we like:
The VariTrans P 29001 P2/01 DC Low Voltage Measurement Transducers have been specially designed for the measurement of the millivolt output from precision DC current shunts and low voltage DC signals up to 100V DC. They reliably isolate high voltage potentials at the input circuit. The separation distances are designed to withstand permanent voltages up to 1kV AC/DC. Protection against electric shock is achieved through protective separation according to EN 61140 between input and output and power supply.
There are 32 selectable DC input ranges to choose from all via DIP switch selection suitable for use with DC current shunts and other low voltage output devices. Measurement input can be either Unipolar & Bipolar and cover the following 16 ranges 30mV, 60mV, 90mV, 100mV, 120mV, 150mV, 200mV, and 300mV for current shunts and then the following low voltage inputs 5V, 10V, 20V, 30V, 50V, 60V, 80V & 100V. You can then choose your output signal requirement from 6 options including 4…20mA, -20…0…+20mA, +20…0…-20mA, -10…0…+10V & +10…0…-10V.