VariTrans P 41100 D1 with Fixed DC Low Voltage Ranges

• 6 input/output signal combinations to choose from.
• High accuracy device with a gain error of less than 0.1 %
• Wide range auxiliary power supply from 20 to 253V AC/DC
• Vacuum encapsulation provides max protection against shock & vibrations and helps maintain its isolation voltages allowing for long maintenance free periods.
• To guarantee the specified isolation capabilities devices are subjected to routine testing with 15kV AC to ensure working voltages up to 3.6KV AC/DC.
• Protection against electric shock with protective separation up to 1800 V AC/DC according to EN 61140
• New TransShield technology enables narrow 22.5 mm wide yet robust modular housing.
• Complies with EN61010-1 Safety Standard
• Complies with EN 50124-1 This Standard deals with insulation coordination in railways.
• Protection against electric shock is achieved through protective separation according to EN 61140
• Each transducer is protected with a 5 year warranty.

The Knick VariTrans P 41100 D1 Fixed DC Low Voltage Input Transducers can be used as an interface with a range of process transmitters used within high voltage systems. There are a total of 6 input/output signal combinations to choose from. These include the following low voltage transmitter output signals 0…1V, ±1V & ±10 and the following process signal outputs of either ±20mA, 4…20mA or ±10V. Further voltage input/output combinations are also available.

The isolation system meet the requirements of EN61010-1 and EN 50124-1 This European Standard deals with insulation coordination in railways. It applies to equipment for use in signalling, rolling stock and fixed installations. In this series, Knick relies on the newly developed TransShield technology, which compared to conventional designs enables very compact high-voltage transformers with low leakage. Thanks to the resulting space advantage, the P 41100 D1 fixed low voltage input transducers can be installed in its narrow 22.5 mm wide modular housing.

The 6 Fixed low voltage Input transducers are available with the following DC input & output options.